Filter
Top Products
43
Specifications
ENGINE:
19 HP Kawasaki
Make Kawasaki
Model FH580V
Horsepower 19 @ 3600 rpm
Displacement 35.7 Cu. in (585 cc)
Electrical System 12 Volt Starter, 13 amp. Alternator,
Battery: 340 CCA
Oil Capacity 1.9 US qt. ( 1.8 L) w/ Filter
26 HP Briggs & Stratton
Make Briggs & Stratton
Model 44P777-0124-G1
Horsepower 26 @ 3600 rpm
Displacement 44.2 Cu. in (724 cc)
Electrical System 12 Volt Starter, 16 amp. Alternator,
Battery: 340 CCA
Oil Capacity 2.0 US qt.. (1.9 L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 8 Gallons (30,3 L)
Rear Wheels Tire Size: 20 x 7.00 -10 (36” Model)
Tire Size: 20 x 8.00 -10 (48” Model)
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00 - 5
Inflation Pressure: 40 psi (2,76 bar)
TRANSMISSIONS:
HydroGear ZL-KMEF-3L7C-1LLX (LH)
HydroGear ZL-GMEF-3L7B-1LLX (RH)
Type ZT2800
Hydraulic Fluid SAE 20W-50 motor oil
Speeds Forward: 0-7 MPH (0-11,27 km/h)
@ 3400 rpm Reverse: 0-5 MPH (0-8.05 km/h)
Continuous Torque 180 ft. lbs. (244 N.m.)
Output
Maximum Weight 440 lbs. (200 Kg) per axle
on Axle
DIMENSIONS:
Overall Length: 68” (173 cm)
Overall Width
36” Model: 37” (94 cm)
48” Model: 49” (125 cm)
Height: 43” (109 cm)
Weight (apx.): 750 lbs. (340 kg)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers)
code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in
accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at
3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operating conditions and
engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of
environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used
in a given piece of power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors
including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to
manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series
engine.
Specifications
Specifications