Snapper RP217019BV Lawn Mower User Manual


 
10
Section 2 - OPERATING INSTRUCTIONS
WARNING
DO NOT attempt any maintenance, adjustments or
service with engine and blade running. STOP
engine and blade. Disconnect spark plug wire and
secure away from spark plug. Engine and
components are HOT. Avoid serious burns, allow
sufficient time for all components to cool.
STEP 3: Route recoil rope around outside of rope guide
pulley. See Figure 2.12. (NOTE: Recoil rope may need to
be slackened. Refer to “Starting & Operation”.)
FIGURE 2.12
2.9 INSTALLATION OF GRASS BAG
(Door Type Bag)
STEP 1: Install grass bag adapter. Refer to Section
“Installation of Grass Bag Adapter”.
STEP 2: Install grass bag by sliding connector over
adapter flange. See Figure 2.13.
STEP 3: Attach grass bag hooks over middle handle
cross bar. See Figure 2.13.
FIGURE 2.13
WARNING
DO NOT operate without entire Grass Catcher or
guard in place. Grass Catcher components are
subject to deterioration during normal use. Inspect
frequently and replace worn or damaged
components immediately.
WARNING
Grass Catcher bags used on SNAPPER products
are made of woven fabric, and are subject to
deterioration and wear during normal usage.
Check condition of bag before each use.
Immediately replace worn or damaged catcher bags
with only bags recommended by SNAPPER. The
grass catcher is optional equipment on some
models.
SECURE
ADAPTER
TO DECK
ROUTE RECOIL ROPE
AROUND PULLEY
HOOK TO MIDDLE
HANDLE CROSS BAR
SLIDE
CONNECTOR
OVER FLANGE