Filter
Top Products
8
SERVICE & LUBRICATION
HOURS PROCEDURE COMMENTS
BREAK-IN.......................................Check all Grease Points and add if necessary
........................................................Check all Fasteners for proper tightness.
DAILY..............................................Remove Debris from under Belt Cover.........................More often if needed.
........................................................Sharpen Cutter Blades.................................................Tighten to 60-75 Ft.-Lbs.
........................................................Grease Cutter Spindle Bearings...................................Use Chevron SRI Grease or equal.
........................................................Inspect Interlock Switches for Damage ........................Replace if Needed.
........................................................Inspect Belts for Wear or Damage ...............................Replace if Needed.
WEEKLY.........................................Check Tire Pressure.....................................................Add or Adjust as required.
........................................................Check Safety Interlock System.....................................Inspect OPC Switch for proper Operation.
........................................................Grease Caster Wheel Bearings....................................General Purpose Grease.
........................................................Grease Caster Support Arms.......................................General Purpose Grease.
........................................................Grease Idler Arm Pivots on Cutter Deck. .....................General Purpose Grease.
MONTHLY.......................................Lube Controls and Linkages.........................................Use Medium Duty Oil.
........................................................Gear Box Lubrication....................................................Use 80W90 Gear Oil
........................................................ .....................................................................................(Total Capacity is 16 Ounces)
DECALS
DECAL P.N. 4-6371
DECAL P.N. 1-3010
DECAL P.N. 7-3647