Filter
Top Products
5
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER MID MOUNT Z-RIDER. Its purpose, aside
from recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Page 2 and 3 of this manual and All
SAFETY messages on the MID MOUNT Z-RIDER and its
attachments before operating. SNAPPER recommends
returning the MID MOUNT Z-RIDER to an authorized
SNAPPER dealer annually for inspection and addition of
any new devices which might upgrade the safety of the
mower.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1, shows
the essential parts of the SNAPPER MID MOUNT Z-
RIDER. It is recommended that all operator’s of this
equipment become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy
for future reference. For the nearest SNAPPER dealer
in your area, check the yellow pages under the heading
LAWN MOWERS. For engine parts and service, look
for the engine manufacturer’s dealers under the
heading, ENGINES - gasoline.
BLADE ENGAGEMENT
SWITCH
PARKING
BRAKE
LEVER
CHOKE CONTROL
ENGINE SPEED
CONTROL
MOTION CONTROL
LEVER
(JOYSTICK)
DECK LIFT LEVER
FOOTREST
DISCHARGE
DEFLECTOR
KEY SWITCH
AUXILLARY FUEL TANK
OPERATOR’S SEAT
FUEL TANK