Filter
Top Products
HANDLES AND CONTROLS
Footnotes:
TP 400-5043-1-WB-N
Manual No. 700613821" STEEL DECK WALK BEHIND MOWER
"MR" SERIES 18
5
Part No Descri
p
tionItem Qt
y
Note
1 7074411 1 HANDLE, Upper used on All
2 7074156 1 HANDLE, Middle used on All
3 7033985 1 HANDLE, Lower LH (Adjustable) used on All
4 7033986 1 HANDLE, Lower RH (Adjustable) used on All
5 7074418 1 BAIL, OPC Control used on All
6 7034872 1 CLIP, Zone Control used on All
7 7034608 1 CABLE, Blade Control (46.75/5.38 length) used on All
8 7074473 1 HANDLE, Wheel Drive used on Self Propelled
9 7028407 1 GRIP,Wheel Drive Handle (International Symbol) used on Self Propelled
10 7034604 1 CABLE, Clutch Pull (Z-bend, 41.25” long) used on Self Propelled
11 7012121 1 COVER, Vinyl used on Self Propelled
12 7012122 1 SPRING, Clutch used on Self Propelled
13 7038478 1 SECTOR, Speed '77VP used on Self Propelled
14 7024641 2 WIRE TIE, 1.29” Long (Black) used on All
15 7012093 1 SPRING, Speed Control used on Self Propelled
16 7090188 1 WASHER, 3/8” Flat used on Self Propelled
17 7023801 1 GRIP, Speed Control Handle used on Self Propelled
18 7032830 1 ANCHOR, Lever used on Self Propelled
19 7032408 1 GUIDE, Lower V-Belt used on Self Propelled
20A 7023790 1 ROD, Transfer used on Self Propelled
20B 7051698 1 ASSY., Transfer Rod (Incl. indented items below) used on EMRP216518B
-- 7015752 1 LINK, Transfer used on EMRP216518B
-- 7015753 1 BALL JOINT, 1/4-28 used on EMRP216518B
-- 7090095 1 NUT, 1/4-28 Hex used on EMRP216518B
21 7010937 1 CLIP, Transfer Rod 1/4” used on Self Propelled
22 7090895 1 T-NUT, 5/16-18 used on Self Propelled
23 7012114 1 BUSHING, Differential used on Self Propelled
24 7090595 2 BOLT, 5/16-18 x 3/4” Hex Flange Lock GR5 used on All
25 7090238 1 SCREW, 5/16-24 x 1” Hex Head Cap GR5 used on All
26 7090799 1 BOLT, 5/16-18 x 5/8” Short Neck Carriage GR5 Was 91026 (used on All)
27 7091601 8 NUT, 5/16-18 Hex Flange Lock, GR 5 Was 91070 (used on All)
28 7091606 1 NUT, 5/16-24 Hex Center Lock GR5 Was 91074 (used on Self
Propelled)
29 7023813 1 CLIP, Cable/Wiring used on All
30 7091740 4 SCREW, 5/16-18 x 1-7/8” Curved Head GR2 Was 91189 (used on All)
31 7035744 4 KNOB, 5/16-18 Wing (Black) used on All
32 7079577 3 SCREW, 1/4-20 x 1-1/2 Hex Head Cap GR5 qty 1 on push model
33 7090053 3 WASHER, 1/4” Internal Tooth Lock Was 91023 (qty 2 on push)