Snapper Z-rider Lawn Mower User Manual


  Open as PDF
of 4
 
4
PRE-OPERATION CHECKLIST
Snapper has completed initial adjustments and performed operational tests prior to shipping the machine. Due
to the possible effects of shipping, handling and storage, Snapper intends for all of the following items to be
verified and necessary final adjustments made at time of setup. It remains good practice and is strongly
recommended that all the items also be checked prior to placing the machine into service. It is very important
that setup is verified and all operational tests completed and results are acceptable. After completing this form,
sign and retain for future reference.
CUTTING BLADE & MOWER
__ BLADE RETAINING hardware checked for proper tightness.
__ MOWER CUTTING HEIGHT settings checked and adjusted as needed (with tires properly inflated).
__ MOWER SIDE TO SIDE level checked and adjusted as needed (with tires properly inflated).
__ MOWER FRONT TO REAR setting checked and adjusted as needed (with tires properly inflated).
PRE-START CHECKS & SERVICES
__ TIRES checked and inflated to correct pressures.
__ ENGINE OIL level checked. See Engine Owners Manual.
__ FUEL added to tank and system checked for leaks.
__ BATTERY (Not overfilled!) reinstalled and properly connected with red boot over positive terminal.
__ HYDRAULIC FLUID level checked.
OPERATIONAL TESTS
__ CHECK SEAT SWITCH for proper function.
__ INTERLOCK SYSTEMS checked to insure proper functioning.
__ ENGINE STARTED and throttle control settings checked.
__ ALL OPERATIONS as listed on console checked.
__ IGNITION SWITCH checked to insure engine stops when turned to OFF position.
__ PARKING BRAKE tested to insure proper operation.
__ BLADE ENGAGEMENT SWITCH tested for engagement and disengagement of blade.
__ BLADE BRAKE function verified. Blade rotation stops in 7 seconds or less.
__ MACHINE TRACKING tested and adjusted as required.
DEMONSTRATION & INSTRUCTION
__ DEMONSTRATED proper operation of mower to purchaser.
__ INSTRUCTED purchaser to read and follow instructions in Operator's Manual.
__ PERSONALLY HANDED Operator's Manual to purchaser.
__ ASSISTED purchaser in completing Product Registration cards.
DEALER'S RECORDS
Sale Date
Model Serial No.
Dealer's Name
Signature
Address_________________________ City
State Zip
Will Mower be used Commercially? Yes ______________ No
Purchaser's Name
Signature
Address______________________________ City
State Zip
IMPORTANT: This form is to be retained by the dealer for future reference regarding Warranty, proof of
purchase, traceability for product recall or service, etc. Complete the Product Registration Card and Mail to
Customer Service Department at SNAPPER, PO BOX 1379, McDonough, Georgia, 30253.
COPYRIGHT © 2003
SNAPPER PRODUCTS INC.
ALL RIGHTS RESERVED
INSTRUCTION No. 7-5597 (I.R. 4/1/03)
 previous