Snapper LE3191E Snow Blower User Manual


 
AUGER HOUSING, DRIVE SYSTEM, CHASSIS
Footnotes:
TP 400-5024-M-LE-N
Manual No. 7006026(L.E.) SINGLE STAGE
SERIES 0 & 1
11
Part No Descri
p
tionItem Qt
y
Note
31 7024626 1 PULLEY, Idler 19” Models
31 7027460 1 PULLEY, Single Flange Idler 17” Models
32 7090669 1 SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
33 7024621 1 SPRING, Idler Torsion
34 7024620 1 BUSHING, Pivot
35 7091195 3 SCREW, #10-16 x 3/4” Pan Head Self-Tap
36 7033692 1 AXLE, 3/8” Dia. Wheel
37 7014098 4 WASHER, 3/8” Flat
38 7026160 2 WHEEL, 7 x 1.50
38 7026240 2 WHEEL, 7” Models 3190M, 3190E & Series
1
39 7014667 2 PUSH NUT, 3/8”
40 7090010 5 WASHER, #10 Flat
41 7024852 1 SUPPORT, Fuel Tank
42 7091573 1 BOLT, 1/4-20 x 5/8” Short Neck Carriage, GR 5 Was 90666
43 7090372 1 NUT, 1/4-20 Hex Nyloc
44 7027924 2 SPACER, Hex (2.69” long) 17” Models
44 7027925 2 SPACER, Hex (3.69” long) 19” Models
45 7035947 1 BLADE, Scraper 17” Models
45 7035948 1 BLADE, Scraper 19” Models
46 7091148 4 SCREW, 1/4-20 x 1/2” Pan Head Machine (Torx)
47 7090372 4 NUT, 1/4-20 Hex Nyloc
48 7090372 2 NUT, 1/4-20 Hex Center Lock Was 91099
49 7047026 1 WELDMENT, Auger 17” Models
49 7047025 1 WELDMENT, Auger 19” Models
50 7029566 4 SHOE, Flite 17” Models
51 7018638 4 SHOE, Flite 19” LE Models
51 7029565 4 SHOE, Flite Models 3190M, 3190E & 19”
Series 1
51 7014612 2 SHOE, Center Flite
52 7091286 24 SCREW, #10-24 x 1/2” Hex Washer Self-Tap Sems
53 7090391 1 WASHER, 5/16” Internal Tooth Lock
54 7090052 1 WASHER, 1/4” Split Lock
55 7010935 2 WASHER, 3/4” Flat
Note* Riveted housing, throat & ring assembly with scraper installed
Note** 1994 & earlier models use a different belt guard & one hex spacer. If replacing item 5 belt guard, install (2) item 44
hex spacers & hardware.