Snapper E9266, E11306 Snow Blower User Manual


 
18
Section 4 - REPAIR & ADJUSTMENTS
4.1.5. SKID SHOE ADJUSTMENT
NOTE: It is recommended to raise the
auger/impeller housing when clearing rough or
graveled surfaces. To raise auger/impeller the skid
shoes should be lowered.
1. Tilt machine up and place a wooden block under
auger/impeller housing.
2. Loosen bolts on both skid shoes. Move shoes
down to raise auger/impeller housing or move skid
shoes up to lower auger/impeller housing. See
Figure 4.8.
FIGURE 4.8
SCRAPER BLADE
SKID SHOE
LOOSEN CARRIAGE
BOLTS TO SHIFT
SCRAPER BLADE
BLOCK
UP FOR SMOOTH, PAVED SURFACES
DOWN FOR ROUGH, GRAVELED SURFACES
SKID
SHOE