Snapper E115327 (1694858) Snow Blower User Manual


 
Handles and Controls Group
Footnotes:
TP 400-5135-2-LF-N
Manual No. 7006080TWO STAGE LARGE FRAME
(2006) SERIES 7
5
Part No Descri
p
tionItem Qt
y
Note
1 1726833 1 CABLE AND SPRING ASSEMBLY, R.H. Auger
2 1731334A 1 HANDLE, Tube, R.H.
3 1922127 1 CAPSCREW, Hex Head, 5/16-18 x 1-3/4 G5
4 1921221 3 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 G5
5 1960671 2 SCREW, Pan Head Torx, 1/4-20 x 3/4, Thread Cutting
6 1715654 2 SPACER, 1/4ID x 25/64OD x 11/64LG
7 1922837 2 CAPSCREW, Hex Head, 1/4-20 x 1-1/2 G5
8 1722638 1 HANDLE, Clutch R.H.
9 1715655 2 SPACER
10 1923358 2 NUT, Hex Centerlock, 1/4-20
11 1726317 2 GRIP On all except 38” models
12 1723965 2 HAND GRIP, Heated 1” Diameter Used on 38” models
13 1923341 3 CAPSCREW, Hex Head 1/4-20 x 3/4 G5 Used on 38” models
14 1724037 1 RESISTOR BLOCK, 2 Male Terminal Used on 38” models
15 1723967 1 SWITCH, Hand Warmer Used on 38” models
16 1728968 1 HARNESS, Wiring Used on 38” models
17 1715956 1 CLIP, Wire Used on 38” models
18 1726983A 1 DASH AND SUPPORT ASSEMBLY, Tubular
19 1667588 4 BUSHING, 47/125ID x 437/1000OD x 1/5LG On all except 38” models
20 1714084 1 KNOB, Spinner On all except 38” models
21 1960093 1 NUT, Push Pal, 3/8” Diameter Stud Capped On all except 38” models
22 1722690 1 SPRING, Complete
23 1722633 1 ROD AND SPRING ASSEMBLY, w/Pin (Includes Ref. No. 26)
24 1960519 1 PUSH NUT, Stud Cap, 1/2
25 1722630 1 ROD, 4/25” Diameter, E-Coat
26 1722667 1 HANDLE, Clutch L.H.
27 1731333A 1 HANDLE, Tube, L.H.
28 1960662 1 CAPSCREW, Hex Head, 1/4-20 x 2 G5
29 1920397 2 NUT, Hex Lock ESNA Light, 1/4-20NC-3B
30 1921319 2 WASHER, 1/4
31 1933896 1 NUT, Hex Lock, 10-24
32 1722631A 1 LEVER, Pivot
33 1718791 1 CABLE AND HANDLE ASSEMBLY, Clutch
34 1725702 1 SCREW, Pan Head Torx, #10 x 1/2 Thread Cut
35 1726995 1 SPACER, 1-1/4 LG Beveled End
36 1726728 1 CLIP, Snow Stick
37 1960727 1 SCREW, Hex Flange Slot, #10-24 x 2-1/2