Snapper D20380 Trimmer User Manual


 
Handles & Controls
Footnotes:
TP 400-5103-1-WB-N
Manual No. 700604020" STEEL DECK LIGHT WEIGHT
SERIES 0
5
Part No Descri
p
tionItem Qt
y
Note
1 7074384 1 HANDLE, Upper Was 33473
7033477 1 HANDLE, Upper Was 33474 (For OPP Models
Only)
2 7036350 1 HANDLE, Middle
7033406 1 HANDLE, Middle (For OPP Models Only)
3 7046502 1 HANDLE, Lower Left Hand Was 38467
4 7035342 1 HANDLE, Lower Right Hand Was 38466
5 7017072 1 CONTROL, Blade
6 7033904 1 CLIP, Blade Control Was 32829
7 7023765 1 CABLE, Blade Control (Briggs & Robin 4-Cycle)
7027475 1 CABLE, Blade Control (Robin 2-Cycle) Was 24146
8 7014343 1 BUSHING
9 7023813 1 CLIP, Wiring Harness
10 7019254 1 CONTROL, Throttle (Briggs & Robin 4-Cycle)
7024140 1 CONTROL, Throttle (Robin 2-Cycle)
11 7090095 1 NUT, 1/4-28 Hex Was 91024
12 7016544 2 PLUG (For OPP Models Only)
13 7023735 4 KNOB, 5/16-18
14 7091740 4 SCREW, 5/16-18 x 2" Curved Head Was 91189
15 7024088 1 DECAL, Blade Control
15A 7023745 1 DECAL, Blade Control (Used On Models Without Foam
Grip Handles)
15B 7024211 1 DECAL, Blade Control
16 7090898 1 SCREW, #10-32 x 5/16" Sems
17 7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage Was 91026
18 7091601 4 NUT, 5/16-18 Hex Flange Lock Was 91070
19 7090112 1 SCREW, 1/4-28 x 2" Hex Head Cap Was 90963
20 7090053 1 WASHER, 1/4 Internal Tooth Lock Was 91023
21 7090391 1 WASHER, 5/16 Internal Tooth Lock Was 91068
22 7049753 1 FENDER, Weldment Structure (For European Models)