Filter
Top Products
7
ENGINE
SPEED
CONTROL
MOVE TO
CHOKE
POSITION
Section 2 - OPERATING INSTRUCTIONS
2.2 STARTING & OPERATION
2.2.1. ENGINE & BLADE
(Choke Models)
1. Move fuel shut off valve to the “ON” position. See
Figure 2.4.
NOTE: Stop the engine (and blade) by releasing the
blade control.
FIGURE 2.4
2. Move engine speed control to the “Choke”
position. See Figure 2.5.
3. Pull blade control against handle.
4. Pull rope start handle to crank engine.
5. After engine starts, allow a brief warm-up until
engine runs smooth.
2.2.2. PROPELLING MOWER
(Self Propelled Models)
1. Move ground speed control to the desired
speed position. See Figure 2.6.
2. Move wheel drive control against handle to
engage wheel drive and propel mower forward.
Forward speed can be adjusted while the mower is
moving by changing position of the ground speed
control. See Figure 2.6.
FIGURE 2.5
FIGURE 2.6
2.3 STOPPING
Stop engine and blade by releasing the blade
control. Stop forward motion of mower by releasing
the wheel drive control.
MOVE CONTROL
AGAINST HANDLE TO
ENGAGE WHEEL DRIVE
SIXTH
FIRST
(FAST)
SIXTH SPEED
POSITION
WHEEL DRIVE
CONTROL
BLADE
CONTROL
(SLOW)
FIRST SPEED
POSITION
FUEL SHUT OFF VALVE
SHOWN IN THE “ON”
POSITION
MOVE GROUND
SPEED CONTROL
TO DESIRED
POSITION
HONDA
ENGINES
KAWASAKI
ENGINES
FUEL SHUT OFF VALVE
SHOWN IN THE “ON”
POSITION