Filter
Top Products
16
Section 4 - REPAIR & ADJUSTMENTS
4.1.5. SKID SHOE ADJUSTMENT
NOTE: It is recommended to raise the auger/impeller
housing when clearing rough or graveled surfaces. To
raise auger/impeller the skid shoes should be lowered.
1. Tilt machine up and place a wooden block under
auger/impeller housing.
2. Loosen bolts on both skid shoes. Move shoes
down to raise auger/impeller housing or move skid
shoes up to lower auger/impeller housing. See Figure
4.8.
FIGURE 4.8
SCRAPER BLADE
SKID
SHOE
LOOSEN CARRIAGE
BOLTS TO SHIFT
SCRAPER BLADE
BLOCK
UP FOR SMOOTH, PAVED SURFACES
DOWN FOR ROUGH, GRAVELED SURFACES
SKID
SHOE