Snapper 8560 Snow Blower User Manual


 
Features& Controls
CONTROL LOCATIONS
The information below briefly describes the function of individual controls. Starting, stopping, and driving require the
combined use of several controls appfied in specific sequences. To learn what combination and sequence of controls
to use for various tasks see the OPERATION section.
_1_ Speed Selector
Selects forward speeds 1-5 and reverse speeds 1-2.
Traction Control / Free Hand TM Lock
Engages traction drive to wheels when depressed. Also
locks auger control when depressed simultaneously.
Releasing the traction control lever releases the Free
Hand TM auger control lock and stops the drive wheels.
_._ Auger Control
Engages the auger/impeller when depressed. Releasing
the control stops the auger/impeller.
Chute Direction Control
Rotates the discharge chute to desired position.
5_ Chute Deflector Knob
Locks chute deflector in desired position.
Traction Lock Pins
The traction drive to each wheel can be locked and
unlocked with the Traction Lock Pins (H, Figure 4) to per-
mit the unit to "free-wheel," allowing easier manual han-
dling and transport of the snowthrower.
r_ Electric Start Button (Optional)
Activates electric starter.
r_ Fuel
Fuel tank filler cap (see illustration). Note: The fuel shut
off valve is located under the fuel tank. Close the valve
when the snowthrower is not in use. Open the valve
before starting.
r_ Starter Handle
Used to pull-start the engine.
E Primer Button
Primes carburetor for faster cold starting.
_!_1 Throttle Lever
Controls engine speed. Move toward the hare icon for
faster engine speed, move toward the turtle icon for
slower engine speed. Move the throttle all the way to
STOP to stop the engine.
_ Engine Key
Prevents starting of engine without key. Stops engine
when removed.
W Choke Knob
Adjusts air/fuel mix for easier cold weather starting.
9