Filter
Top Products
www.snapper.com
REAR ENGINE RIDING MOWER
SERIES 24
Power Rating
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers)
code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in
accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at
3600 RPM. Net power values are taken with exhaust and air cleaner installed whereas gross power values are collected with-
out these attachments. Actual gross engine power will be higher than net engine power and is affected by, among other
things, ambient operating conditions and engine-to-engine variability. Given the wide array of products on which engines are
placed, the gas engine may not develop the rated gross power when used in a given piece of power equipment. This differ-
ence is due to a variety of factors including, but not limited to, the variety of engine components (air cleaner, exhaust, charg-
ing, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, alti-
tude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an
engine of higher rated power for this Series engine.
Common Service Parts Part Number
Cutter Blade (28”) 7104196
Cutter Blade (30”) 7026565
Cutter Blade (33”) 7034168
Cutting Deck Belt (28 and 30”) 7022252
Cutting Deck Belt (33”) 7043844
Product Specifications
2811524BV 2812524BVE 3014524BVE 3317524BVE
Deck Size (inches) 28 28 30 33
Height of Cut (inches) 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0 1.5 - 4.0
Transmission Type 5-Spd Disc 5-Spd Disc 5-Spd Disc 5-Spd Disc
Ground Speed-Fwd/Rev (mph) 1.0-4.6 / 0-1.9 1.0-4.6 / 0-1.9 1.0-4.6 / 0-1.9 1.0-4.6 / 0-1.9
Engine Power (hp) 11.5 12.5 14.5 17.5
Engine Displacement (cc) 344 344 344 502
Fuel Tank Capacity (qt) 7 7 7 7
Not for
Reproduction