Filter
Top Products
STEP 13: Assemble the grass containers:
a. Match the numbers on the side of each container
segment with its corresponding segment. ‘1’s and ‘2’s
designate the first container, ‘3’s and ‘4’s designate the
second. See Figure 21.
b. With the matched numbers aligned, insert the bottom
segment of each container through the middle segment, and
the middle segment through the top segment, until the tabs
around the top of each segment lock the segment in place.
See Figure 21.
c. With the containers assembled, firmly insert one plastic
fastener out through the aligned holes in all four sides where
the top and middle segments meet. See Figure 22.
STEP 14: Flip open the cover assembly, then slide each
container fully onto the U-tube assembly. See Figure 23.
NOTE: Make sure that the warning label on the side of each
container is facing out.
When closing the cover, make sure that the cover handle
locks under the lips of the containers.
Assembly is complete.
6
FIGURE 21
MATCH &
ALIGN
NUMBERS
TABS
FIGURE 22
INSERT FASTENERS
(4 PER CONTAINER)
FIGURE 23
WARNING
LABELS
FACING
OUT
COVER HANDLE
SHOULD LOCK ONTO
CONTAINERS WHEN
COVER IS CLOSED
SLIDE CONTAINERS
ONTO U-TUBES