Filter
Top Products
30" CUTTING DECK, DEFLECTOR
Footnotes:
TP 400-5003-5-RE-N
Manual No. 7006152REAR ENGINE RIDER
SERIES 23
35
Part No Descri
p
tionItem Qt
y
Note
1 7073434 1 COVER, Spindle
2 7091015 2 SCREW, 1/4-20 x 3-1/2” Hex Head w/Free Spinning Washer
3 7091016 4 SCREW, 1/4-20 x 5/8” Hex Head w/Free Spinning Washer
4 7061971 1 DECK, 30” Replacement (Painted deck with decals)
5 7034024 1 * BRACKET, Front Anti-Scalp
6 7034026 1 * BRACKET, Anti-Scalp, 30” L.H. Rear
7 7034025 1 * BRACKET, Anti-Scalp, 30” R.H. Rear
8 7090731 8 BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR 5
9 7090585 10 NUT, 5/16-18 Hex Flange Lock, GR 5 or 7091070
10 7090859 3 * SCREW, 3/8-24 x 3-3/4” Hex Head Cap, GR 5 or 7091532
11 7015272 3 * SPACER
12 7019190 3 * WHEEL, Gage
13 7090289 3 * NUT, 3/8-24 Hex Center Lock, GR 5 or B or 7091518 (3/8-24 Hex Nyloc
Nut)
14 7091508 2 BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
15 7091296 2 WASHER, 5/16” Flat
16 7090492 2 NUT, 5/16-18 Wing
17 7052553 1 ASSEMBLY, 30” Deflector (Incl. items 18, 19, 20 & 22)
18 7026846 1 PIN, Hinge (Straight, 8-7/8” long)
19 7024569 1 HINGE, Deflector (8” long)
20 7016428 1 SPRING, Hinge
21 7025047 1 DEFLECTOR, 30” Deck
22 7013010 1 DECAL, Danger, (Cut Finger)
23 7091510 3 BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5 or 7090606
24 7090612 3 BOLT, 3/8-16 x 3/4” Hex Flange Lock
25 7090613 9 NUT, 3/8-16 Hex Flange Lock
26 7090392 2 SCREW, 1/2-20 x 1” Hex Head Cap, GR 5
27 7090509 2 WASHER, 1/2” Internal Tooth Lock
28 7090559 2 NUT, 1/2-20 Hex Jam
29 7018069 1 BLADE, 30”
30 7026565 1 BLADE, Ninja, 30”
31 7060735 1 KIT, Air Lift (Includes items 32 thru 35)
32 7090228 6 SCREW, 5/16-24 x 11/16” Oval Head Machine
33 7031724 2 AIR-LIFT (30” Models)
34 7090391 6 WASHER, 5/16” Internal Tooth Lock
35 7090223 6 NUT, 5/16-24 Hex
Note: * These parts comprise # 7061157 (Gage Wheel Kit for 30” Snapper Decks). Bracket mounting fasteners are also
included.