Filter
Top Products
40
www.simplicitymfg.com | www.snapper.com
Specifications
ENGINE:
24 HP* Briggs & Stratton
Make Briggs & Stratton
Model 44M7770113E1
Horsepower 24 @ 3500 rpm
Displacement 34.75 Cu.in (570 cc)
Electrical System 12 Volt, 16 amp.Alternator, Battery: 340
CCA
Oil Capacity 4 US pt. (1.9 L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 6.5 Gallons (24.6 L)
Rear Wheels Tire Size:20 x 8.00 -10
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00-5
Inflation Pressure: 40 psi (2,76 bar)
TRANSMISSIONS:
HydroGear ZK-GMEE-3L7B-1YLX (RH)
HydroGear ZK-KMEE-3L7C-1YLX (LH)
Type ZT2800
Hydraulic Fluid 20W-50 conventional detergent motor oil
Speeds Forward: 0-7 MPH (0-11.27 km/h)
@ 3400 rpm Reverse: 0-5 MPH (0-8.05 km/h)
Continuous Torque 180 ft.lbs. (244 N.m.)
Output
Maximum Weight 440 lbs. (200 Kg) per Axle
on Axle
DIMENSIONS:
Overall Length 78” (190,5 cm)
Overall Width 41.5”(105 cm)
Height 42” (107 cm)
Weight (apx.)
With 50”Mower Deck 723 lbs. (328 kg)
With 44”Mower Deck 712 lbs. (322 kg)
Specifications
NOTE: Specifications are correct at time of printing and are subject to change without notice.
Technical Manuals
Additional copies of this manual are available, as well as
fully illustrated parts lists. These manuals show all of
the product’s components in exploded views (3D
illustrations which show the relationship of parts
and how they go together) as well as part
numbers and quantities used. Important
assembly notes and and torque values are also
included.
For applicable manuals currently available for your model,
contact our Customer Publications Department at 262-284-8519
(Simplicity) / 866-313-6682 (Snapper). Have the model and serial
information for your machines available when phoning in your request.
Technical manuals can be downloaded from
www.simplicitymfg.com | www.snapper.com
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of
Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance
has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at
3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected
by, among other things, ambient operating conditions and engine-to-engine variability. Given both the wide array
of products on which engines are placed and the variety of environmental issues applicable to operating the
equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment
(actual "on-site" or net power).This difference is due to a variety of factors including, but not limited to,
accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient
operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and
capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
Technical Manuals