Filter
Top Products
Handles, Blade Control
Footnotes:
TP 400-5097-3-WB-N
Manual No. 700603819" WALK BEHIND MOWERS
SERIES 7
5
Part No Descri
p
tionItem Qt
y
Note
1 7036353 HANDLE, Upper (Tecumseh)
7036354 HANDLE, Upper (Briggs)
2 7036350 HANDLE, Middle
3 7046502 HANDLE, Lower Left Hand Was 38467
4 7035342 HANDLE, Lower Right Hand Was 38466
5 7017072 CONTROL, Blade
6 7033904 CLIP, Blade Control Was 32829
7 7023820 CABLE, Blade Control (Briggs) ('90 Models)
7016121 CABLE, Blade Control (Tecumseh) ('90 Models)
7016707 CABLE, Blade Control (Briggs 3.5 HP) ('91 Models &
Later)
7023765 CABLE, Blade Control (Briggs 3.5 HP) (European
Models)
7016121 CABLE, Blade Control (Tecumseh 3 HP 2-CY.) ('91
Models & Later)
7016709 CABLE, Blade Control (Tecumseh 4 HP 2-CY.) ('91
Models & Later)
8 7014343 2 BUSHING
9 7023813 CLIP, Cable/Wiring
10 7019263 CONTROL, Throttle ('90 Models)
7017274 CONTROL, Throttle ('91 Models & Later) (Briggs)
7019254 CONTROL, Throttle ('91 Models & Later) (European
Briggs)
7016706 CONTROL, Throttle ('91 Models & later) (Tecumseh)
11 7023153 CLAMP, Casing
12 7023154 SCREW, #10-32 x 5/8" Self-Tapping (Briggs)
7090898 SCREW, 310-32 x 9/32" Self-Tap Sems (Tecumseh)
13 7023735 4 KNOB, 5/16-18
14 7091013 4 SCREW, 5/16-18 x 2" Curved Head
15 7023745 DECAL, Blade Control
7023893 DECAL, Blade Control (European Models)
16 7090816 SCREW, #10-32 x 3/8" Hex Head Cap, (Briggs)
17 7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage, Grade 5
7090799 4 BOLT, 5/16-18 x 5/8" Short Neck Carriage Was 91026 ('91 Models & Later)
18 7091601 4 NUT, 5/16-18 Hex Flange Lock, Grade 5 Was 90585
19 7090122 SCREW, 1/4-28 x 1-3/4" Hex Head Cap, Grade 5
20 7090053 WASHER, 1/4" Internal Tooth Lock Was 91023
21 7090095 NUT, 1/4-28 Hex, Grade 5 or B Was 91024