Filter
Top Products
2
Installation Instructions Rear Weight Carrier Kit
Form No. 1733188-00
Rev. 06/2005
© 2006 Simplicity Manufacturing, Inc. All Rights Reserved
TP 200-4306-00-AT-N
Snapper, INC.
535 Macon Street
McDonough, GA 30253 USA
BRACKET INSTALLATION
1. Install the new bracket (C, Figure 3) to front axle (D)
securing with existing 7/16-14 capscrews (A) and
existing 7/16-14 locknuts (B).
WEIGHT AND DECK INSTALLATION
1. Use one of the rods (A, Figure 5) in the lower hole of
bracket (D) to Install Mower Deck. See Operator’s
Manual MOWER DECK REMOVAL &
INSTALLATION. Secure rod (A) with clip (B).
2. Insert one of the rods (A) through the hitch (D) and
weight (C). Secure rod (A) with clip (B).
Figure 3. Install Front Weight Carrier Bracket
A. Capscrews, 7/16-14 x 2 (Existing)
B. Locknut, Flange, 7/16-14 (Existing)
C. Bracket, Front Weight Carrier (New)
D. Front Axle (Existing)
D
A
B
C
Figure 4. Remove and Discard Rod & Clip
A. Clip, Safety Pin
B. Rod
C. Hitch, Deck
A
B
C
Figure 5. Rods and Weight
A. Rods
B. Clip, Hair Pin
C. Weight
D. Bracket
D
B
A
A
C