Filter
Top Products
6
Installation Instructions 54”Turbo Blower
7. Install the new deflector and hinge assembly.
Secure the front of the hinge bracket using a new
1/4-20 x 1-1/4 carriage bolt (B, Figure 6), one tapered
spacer (D), lockwasher, and nut (E).
Secure the back of the hinge bracket using a new
1/4-20 x 2-1/4 capscrew (A), 13/16 x 1 cylinder spac-
er (F), tapered spacer (D), and original lockwasher
and nut (E).
Figure 6. Install Deflector and Hinge Assembly
A. 1/4-20 x 2-1/4 Capscrew
B. 1/4-20 x 1-1/4 Carriage Bolt
C. Hinge & Deflector (Deflector Removed for Clarity)
D. Tapered Spacer
E. Original Lockwasher and Nut
F. 5/8 x 1 Cylinder Spacer
Figure 7. Connect Deflector Spring
A. Spring Anchor
B. Spring
C. Deflector Arm
A
B
C
D
E
E
D
F
A
B
C
8. Install the deflector spring (B, Figure 7). Attach the
centered leg to the deflector arm (C). Attach the off-
set leg to the spring anchor (A).
Tapered
Spacer