Filter
Top Products
Figure 7A. 42” Blade
-
Group
1
Figure 76. 42” Blade
-
Group 2
1 Member
From Top Down
Figure 7D. 42” Blade
-
Group 4
Figure 7E. 46” Blade
-
Group 3
Figure 7C. 42” Blade
-
Group 3
Figure 7F. 46” glade
-
Group 4
Figures 7A
thru
7F. Spring Installation
8.
Lower push bar and install dozer blade with kingpin
(A,
figure
2),
spring clip, and pivot pin(B). Reattach
rod guide (D) and secure with cotter pin (C).
9. Tighten capscrew (A, figure 4 or 5) and nut which
hold chain to tractor frame.
10.
Perform Lift Rod Adjustment as instructed in
Operator’s Manual for your Snow Plow/Dozer
Blade.
3’.