Filter
Top Products
20
51-3845, 7/04
Removal/Storage
Sweeper & Hitch Removal
NOTE – Whenever removed, install clevis pins, hitch
pins, clips and hardware into the sweeper and
hitch for storage.
1. Install stands in storage position and fully lower
the attachment lift.
2. Disconnect the drive shaft by pulling back on the
locking collar and then pulling the shaft off.
3. Disconnect hydraulic hoses. Disconnect hairpins
and remove clevis pins. Slide hitch assembly off
the slots on the tractor.
4. Detach the sweeper from the sweeper hitch by
moving the shot pins into open position.
5. Lower the hitch to the ground and back out.
Brush head not shown
OPERATION SECTION
REMOVING SWEEPER AND HITCH
Lock
Open
(Out)