Filter
Top Products
PART NO. DESCRIPTIONREF NO QTY.
Engine & Frame Group - CE/Export Models
Footnotes
ENGINE, 8.5HP B&S Powerbuilt - Model #15A1140117E1 1* 1
ENGINE, 9.5HP B&S Powerbuilt - Model #20A4140116E1 1* 1
ENGINE, 10.5HP B&S Powerbuilt - Model #20E2140112E1 1* 1
ENGINE, 11.5HP B&S Powerbuilt - Model #21C2140113E1 1* 1
CARRIAGE BOLT, 5/16-18 x 1-1/2 4 720064 4
NUT, Speed 5 720376 4
NUT, Hex Flange 5/16-18 Whiz Lock 6 2831277 1
NUT, Hex Flange 5/16-18 ESNA 7 1960686 3
PULLEY, Engine 8 722085 1
WASHER, 5/16-1 (Used only on 8.5HP Models) 9 1919381 2
WASHER, 3/8 (Used only on 9.5HP, 10.5HP & 11.5HP Models) 9 1922755 2
LOCKWASHER, Spring 3/8 10 1916965 1
CAPSCREW, Hex Head 5/16-24 x 1-1/4 G8 (Used only on 8.5HP Models) 11 1921982 1
CAPSCREW, Hex Head 3/8-24 x 1-1/4 G8 (Used only on 9.5HP, 10.5HP & 11.5HP
Models)
11 1960428 1
V-BELT, 3L 33.13 Drive 12 1733324 1
V-BELT, 4L 36.5 Auger (Used only on 8.5HP & 9.5HP Models) 13 1733051 1
V-BELT, 4L 38.5 Auger (Used only on 10.5HP & 11.5HP Models) 13 1733507 1
STOP, Belt 14 1733014 1
LOCKWASHER, Spring 5/16 15 1917356 2/3
CAPSCREW, Hex Head 5/16-24 x 3/4 G5 16 1921515 2
IDLER BRACKET ASSEMBLY, Drive Belt 17 722090 1
BUSHING, Idler Bracket 18 722072 1
SPRING, Extension Idler 19 724418 1
IDLER, Plastic Ball Bearing 20 722378 2
NUT, Hex Centerlock Jam 3/8-16 21 1960251 2
CARRIAGE BOLT, 3/8-16 x 1-1/4 22 724823 1
IDLER ASSEMBLY, Auger (Used only on 8.5HP & 9.5HP Models) 23 1733055 1
IDLER ASSEMBLY, Auger (Used only on 10.5HP & 11.5HP Models) 23 722132 1
SPACER/AUGER BRACKET 24 722118 1
WASHER, 1/2 25 1960027 1
BRACKET & HUB ASSEMBLY, Spring Attached 26 1733626 1
PIN, Hair 27 725367 1
PIN, Clevis 28 725675 1
PANEL, Bottom 29 722067A 1
SCREW, Hex Washer Head Taptite 1/4-20 x 5/8 30 1927429 12
SPRING, Extension Auger Idler 31 722455 1
FRAME, Standard Turn Axle (Used only on 8.5HP Models) 32 722061C 1
FRAME, EZ Turn Axle (Used only on 9.5HP, 10.5HP & 11.5HP Models) 32 1733154C 1
PLATE, Engine Mount 33 1733583C 1
SCREW, Hex Washer Head Taptite 5/16-18 x 1/2 34 1924856 4
SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 35 1664847 6
COVER, Belt w/Toolbox 36 1732486 1
SCREW, 1/4-AB x 3/4 Hex 39 722887 2
SHAFT, Seal 44 1733898 1
Note* See your local Briggs & Stratton distributor for parts & service.
The above parts group applies to the following Mfg. Nos.:
9
2006Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1695082 - L8526EX
1695083 - L9528EX
1695084 - L10530EX
TP 400-4414-00-LW-S