Filter
Top Products
PART NO. DESCRIPTIONREF NO QTY.
Auger & Impeller Group
Footnotes
PULLEY, Auger Input 1 1715091SM 1
SET SCREW, 5/16-18 x 1/2" Square Head Cup Point 2 1928721SM 2
KEY, 3/16 x 3/4" Woodruff 3 2805123SM 2
SET SCREW, 3/8-16 x 1/2" Square Head 4 1960474SM 1
IMPELLER ASSEMBLY 5 1715120A 1
OIL SEAL 6 1612093SM 1
BUSHING 7 1666425SM 1
PIN, Drive-Loc, 3/16 x 1-1/2" 8 2836098SM 1
COLLAR, Thrust 9 1721680SM 1
SHAFT, Rolled Worm 10 1660655SM 1
WASHER, Thrust (.562 ID x 1.000 OD x .030/.032 Thick) 11 1670971SM 1
FLANGE, Bushing 12 1666424SM 1
OIL SEAL 13 1676027SM 2
NUT 1/4-20 Hex Center Lock 14 7092126SM 6
GEAR CASE, RH- Intermediate 15 1726733SM 1
GASKET, Gear Case 16 1721676SM 1
BUSHING 17 1676026SM 2
SHAFT, Auger, 22"/24" 18 1726538SM 1
GEAR, Worm 19 1676024SM 1
GEAR CASE, LH- Intermediate 20 1726732SM 1
PIPE PLUG, 1/8-27 NPTF 3/4 Taper x .31 Long Hex Drive 21 2860625SM 1
SCREW, 1/4-20 x 7/8" Hex Head Cap, GR 5 22 7092125SM 6
FITTING, Grease 23 2821133SM 1
AUGER ASSEMBLY, 22" RH 24 1726536SM 1
AUGER ASSEMBLY, 22" LH 25 1726535SM 1
COTTER PIN, 3/32 x 3/4" 26 1918447SM 2
SHEAR PIN, .248 ID x 1-3/4" Long 27 1668344SM 2
WASHER 28 1960114SM 4
RING, Retaining 29 2827794SM 2
KEY, #605 Woodruff 30 7015894SM 1
TUBE, Low Density Polyethylene Extruded 31 1612112SM 1
FLAT WASHER, .268 ID x .591 OD x .063 Thick 32 7092127SM 12
The above parts group applies to the following Mfg. Nos.:
17
2008Copyright © by Briggs and Stratton Corporation
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
1694587 - 555M
1694588 - 860E
1694595 - 555M
1694596 - 860M
TP 400-4148-01-IW-S