Filter
Top Products
Not for
Reproduction
PART NO. DESCRIPTIONREF NO QTY.
Wheel & Tiller Shaft Group
Footnotes
CAP, Rear Bearing 1 1716793SM 1
SHIM SET, Rear Bearing Cap 2 1716825SM 1
SHIM, 0.062 Thickness x 1 3/4" (As Required) 2 1716826SM 1
SHIM, 0.030 Thickness x 1 3/4" (As Required) 2 1716827SM 1
SHIM, 0.015 Thickness x 1 3/4" (As Required) 2 1716828SM 1
SHIM, 0.010 Thickness x 1 3/4" (As Required) 2 1716829SM 1
BEARING, Tappered ( Cone & Race ) 3 1716810SM 2
SPACER, 1" x 1 1/4" x 0.062 Thickness 4 1716824SM 4
BUSHING 5 1716816SM 4
SHIM SET, Axle Spacer 6 1716815SM 4
SHIM, 0.062 Thickness x 1 3/8" 6 1716817SM 1
SHIM, 0.030 Thickness x 1 3/8" 6 1716818SM 1
SHIM, 0.015 Thickness x 1 3/8" 6 1716819SM 1
SHIM, 0.010 Thickness x 1 3/8" 6 1716820SM 1
RING, Snap Internal Retainer 7 1716830SM 4
SEAL, Housing 8 1716791SM 4
SHAFT, Main Drive 9 1716809SM 1
RING, Snap External Retainer 10 1716821SM 2
SEAL, Oil Drive Shaft 11 1716797SM 1
GEAR, Worm Wheel Shaft 12 1716814SM 1
SHAFT ASSEMBLY, Wheel w/Lock Pin 5HP 13 1716812SM 1
KEY, Parrallel Pin 14 1716813SM 2
GEAR, Worm Shaft 15 1716823SM 1
SHAFT ASSEMBLY 16 1716822SM 1
The above parts group applies to the following Mfg. Nos.:
13
2009
Milwaukee, WI, USA. All rights reserved
© Copyright by Briggs & Stratton Corporation
1693704 - 616RT
TP 400-2488-01-RT-S