Filter
Top Products
Handles and Controls Group - 9560 Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The holes in the frame for Ref. 44 are
slotted so the gear support (Ref. 42) can
be positioned to ensure the inside surface
of the gear support is tight against the
hub of the front gear (Ref. 50).
Mount bushings (Ref. 14)
with flange on inside of
brackets, 3 places.
Slot towards
rear of unit.
Shift rod assembly (Ref. 61)
must pivot freely on
pivot blocks, (Ref. 63).
Apply adhesive to
secure grips.
Insert shift rod (Ref. 58)
into outter hole of Ref. 64.
Must pivot freely
on capscrew (Ref 27).
Apply lubricant as required.
Must slide freely in
dash assembly (Ref 13).
Apply lubricant as required.
43
1
2
3
9
12
13
15
16
21
11
22
7
12
39
4
5
34
36
37
38
40
54
55
57
56
56
58
64
65
63
66
62
35
54
54
63
56
68
61
60
59
41
42
14
52
46
50
51
49
45
52
44
53
14
14
10
6
48
47
8
57
36
67
49
17
18
19
23
20
24
24
1625
27
14
28
29
35
30
31
32
26
33
986728
The above parts group applies to the following Mfg. Nos.:
2005
8
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694589 - 9560E
1694597 - 9560M
TP 400-4155-01-LW-S