Filter
Top Products
4
Specifications
Models
Product code
Sheet Capacity 80g/m
2
*
Cutting Length
Integrated Paper Guide
Size Guide
Score
Perforate
A515pro 3in1
AC001230
30
380mm
A4,A5,A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
A525pro 3in1
AC001235
30
457mm
A3,A4,A5,A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
A535pro 3in1
AC001240
30
609mm
A3,A4,A5,A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
Cutting Restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting
blade handle.
• Always operate trimmer with both hands and on a stable
base or desk.
• Check the fittings of the rotary blade and safety cutting
rail from time to time.
Operating the Trimmer
Place the trimmer on a stable, flat surface such as a
table.
A. Slide the rotary blade housing to the top of the
stationary rail.
A1. To change cutting style push and
hold the blade selector knob while turning to select the
function desired.
B. Raise the clamping handle and place the sheets (30
sheets Max.) to be trimmed at the desired position.
C. Hold sheets securely in place and lower the
clamping handle.
D. Push down on the rotary blade
housing and slide to cut. Several cutting passes may be
necessary to completely cut through all sheets
depending on the load inserted.
TIP: In addition to using the grid pattern and scale for
alignment, use the transparent cutting edge guide
to quickly and accurately align your cuts.
Ẅ Trimmer base with calibrated grid
ẅ Metric and Imperial scale guide
Ẇ Magnetic Back Stop
ẇ Rotary blade / handle assembly
Ẉ Cutting Edge Guide
ẉ Safety cutting mat
Ẋ Manual clamp
ẋ Paper Guide
1
2
3
4
CAUTION: Trimmer should be operated
by an adult or under adult
supervision
ƽ
CAUTION: Sharp blade, do not touch the
edge of the blade
ƽ
ƽ
NOTE: Please retain this information
regarding safe operation of this
paper trimmer
ƽ
* refer to paragraph 4 in the operating the trimmer, section D.
AccuCut
A515pro 3in1 / A525pro 3in1 /
A535pro 3in1