Sima Products A515PRO 3IN1 Trimmer User Manual


 
5
Cutting Mat Replacement
Cutting mat has four cutting positions (2 each side). When
blade does not cut cleanly, either rotate or flip mat over to
new cutting surface. When mat has been worn on all four
cutting surfaces, replace it.
Guarantee
Operation of this machine is guaranteed for two years
from date of purchase, subject to normal use. Within the
guarantee period, GBC will at its own discretion either
repair or replace the defective machine free of charge.
Defects due to misuse or use for inappropriate purposes
are not covered under the guarantee. Proof of date of
purchase will be required. Repairs or alterations made
by persons not authorised by GBC will invalidate the
guarantee. It is our aim to ensure that our products
perform to the specifications stated. This guarantee does
not affect the legal rights which consumers have under
applicable national legislation governing the sale of goods.
Accessories
Cutting mats: 2 Cutting mats, Part number 1756601 (A515pro)
2 Cutting mats, Part number 1756602 (A525pro)
2 Cutting mats, Part number 1756603 (A535pro)
Blades: 1 Multiblade disk, Part number 1756606 (A515pro/A525pro/A535pro)
Cutting Blade Replacement
F. To remove the rotary blade housing cap (2), loosen
and remove the screws (1) on right hand side.
Remove the rotary blade assembly (3); remove center
screw (4) and separate multiblade from housing (5).
Replace multiblade (5) with new multiblade.
Re-assemble in reverse order.
1
2
3
Refer to your local reseller for availability.
Service
Do not attempt to service or repair the unit yourself. If your
trimmer is under warranty return it to the point of purchase
for replacement or repair. If your trimmer is no longer
under the point of purchase return period and requires
replacement or repair, please contact your supplier for
further assistance.
CAUTION: Sharp blade
ƽ