Filter
Top Products
2
Layout
Figure 1: Layout
Hardware Installation
1. Power off all devices you plan to connect to
this splitter.
2. Connect your SDI source to the splitter’s
SDI IN connector using a SDI cable (not
included).
3. Connect your displays to the splitter’s SDI
OUT connectors using a SDI cables (not
included).
4. Connect the splitter's power adapter.
5. Turn on the displays, then the SDI source.
6. The 1x4 3G-SDI Splitter is now ready to use.
Power jack adapterSDI IN
SDI OUT
LED indicators
USB port
(for future firmware
upgrade)