Filter
Top Products
3
• MODE: Selects alternate EDID modes and
functions. See Mode Dial in page 4 & 5.
• DC 5V: Power adapter jack for the included
5V power adapter
Figure 2: Front Panel
• POWER LED: On when the Splitter is
powered on
• SIGNAL LED: On when HDMI source is
detected
Hardware Installation
1. Power off all devices you plan to connect to
the Splitter.
2. Connect your HDMI source's HDMI output
to the Splitter's HDMI IN using an HDMI
cable (HDMI cable not included).
POWER
LED
SIGNAL
LED