Filter
Top Products
4
Safety Equipment and Labels
Cover
ON-OFF
Switch
Throttle Interlock
Protector
Caution Label
IMPORTANT!
Caution, Danger, Warning, and Operation Information
Labels: Make sure all information labels are undam-
aged and readable. Immediately replace damaged or
missing information labels. New labels are available
from your local authorized Shindaiwa dealer.
Figure 2
Cover
ON-OFF
Switch
Throttle Interlock
Protector
Caution Label
WARNING
Use caution to
avoid misassembly
Assemble as
per illustration
DH2510
HT2510
Warning Label
CAUTION
READ AND
FOLLOW THE
INSTRUCTIONS
IN THE
OPERATORS
MANUAL.
WEAR EYE
AND HEARING
PROTECTION
AT ALL TIMES
DURING
OPERATION.
THE BLADES
ARE SHARP!
HANDLE WITH
CARE.
KEEPS HANDS
CLEAR OF
CUTTER
BLADES WHEN
STARING THE
ENGINE.
CAUTION
READ AND
FOLLOW THE
INSTRUCTIONS
IN THE
OPERATORS
MANUAL.
WEAR EYE
AND HEARING
PROTECTION
AT ALL TIMES
DURING
OPERATION.
THE BLADES
ARE SHARP!
HANDLE WITH
CARE.
KEEPS HANDS
CLEAR OF
CUTTER
BLADES WHEN
STARING THE
ENGINE.
Model....................................................................................................
Engine Model....................................................................................................
Engine Type...............................................................................................................................
Engine Bore x Stroke......................................................................................................................................
Engine Displacement..............................................................................................................................................
Unit Weight, Less Fuel.......................................................................
Unit Dimensions (LxWxH)..........................................................
Max. Power.....................................................................................................................................
Fuel/oil ratio...........................................................................................................
Fuel Tank Capacity........................................................................................................................................
Carburetor...........................................................................................................................................
Ignition.........................................................................................................................................
Spark Plug.........................................................................................................................................................
Air Cleaner...............................................................................................................................
Starting Method..................................................................................................................................................
Stopping Method................................................................................................................................
Blade Length........................................................................
Blade Type........................................................................
Clutch Type..........................................................................................................................................
Gear Type.............................................................................................................................................................
Gear Lubrication........................................................................................................................................
Standard Equipment............................................................................
Options.............................................................................................
**EPA Emission Compliance Period..............................................................................................................
Specications
DH2510-24 / DH2510-30
SDH2510
DH2510-24: 5.8 kg (12.8 lb)
DH2510-30: 5.9 kg (13.0 lb)
DH2510-24: 1100 x 245 x 230mm
DH2510-30: 1220 x 245 x 230mm
DH2510-24: 610mm / DH2510-30: 740mm
Double-blade cutting action: Double-edged blade
HT2510-30 / HT2510-40
SHT2510
HT2510-30: 5.7kg (12.5lb)
HT2510-40: 6.0kg (13.2lb)
HT2510-30: 1100 x 210 x 230mm
HT2510-40: 1400 x 210 x 230mm
HT2510-30: 740mm / HT2510-40: 1055mm
Double-blade cutting action: single-edged blade
Heavy-Duty Blade (30" & 40")
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the
engine has been shown to meet Federal emission requirements.
Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).
* meets or exceeds these specifications and is recommended for all Shindaiwa products.
4-cycle, horizontal cylinder, air cooled
34mm x 27mm
24.5cc
1.1 hp (.83kw)@ 7,500 rpm (min
-1
)
50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing Oil
0.55 liter/18.6 oz.
Walbro WYJ, Diaphragm type
Fully electronic, program controlled
NGK CMR5H
Non-reversible heavy-duty filter element
Recoil type
Slide switch, grounding type
Centrifugal clutch, dry-type
Spur gears
Lithium-based grease
Rear handle with integral controls, anti-vibe mountings
,
front handle with guard,
spark plug wrench and blade scabbard (cover)
Category A
Specifications are subject to change without notice.