Filter
Top Products
5
Product Description
Using the illustration as a
guide, familiarize yourself with
your machine and its various
components. Understanding
your machine helps ensure top
performance, long service life
and safer operation.
WARNING!
Do not make unauthorized
PRGL¿FDWLRQVRUDOWHUDWLRQVWRDQ\RI
these units or their components.
6SHFLÀFDWLRQV
Outer Tube
Grip
Cutting
Attachment Shield
Gearcase
Handle
Throttle
Trigger
Throttle
Interlock
Ignition
Switch
Fuel
Tank
Hanger
Engine Name C3410
Engine Model SF3410E
Engine Type 4-cycle, vertical cylinder, air cooled
Dry Weight (Without guard and strap) 6.6 kg /14.6 lb.
Bore x Stroke 38 x 30 mm / 1.5 x 1.2 in.
Displacement 34 cc /2.1 cu. in.
Maximum Power Output 1.4 HP (1.0 kW) @ 8000 (min
-1
)
Engine Idle Speed
3,000 (±300) min
-1
Fuel/Oil Ratio 50:1 with ISO-L-EGD or JASO FD class 2-cycle mixing oil
Fuel Tank Capacity
700 ml / 23.7 oz.
Carburetor Type Walbro, WYL, diaphragm-type
Ignition One-piece electronic, program-controlled
Spark Plug** NGK CMR5H
Plug Gap 0.6 - 0.7 mm / 0.024 - 0.028 inch
Torque 100-150 kg cm / 9.8 - 14.7 N∙m
Air Cleaner Type Foam pre-filter; sealed felt main filter
Starting Method Recoil
Stopping Method Slide switch
Transmission Type Automatic, centrifugal clutch w/bevel gear
EPA Emission Compliance Period* Category A
Specifications are subject to change without notice.
* The EPA emission compliance period referred to on the emission compliance label located on the engine, indicates the number
of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moder-
ate), B = 125 hours (Intermediate) and A = 300 hours (Extended)
** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).