Filter
Top Products
5
Product Description
T272 Grass Trimmer
WARNING!
Do not make unauthorized
modications or alterations to either
of these units or their components.
Using the accompanying illustrations as a
guide, familiarize yourself with your unit
and its various components. Understanding
your unit helps ensure top performance,
long service life, and safer operation.
Handle
Throttle Trigger
Cutting Attachment
Shield
Outer Tube
Grip
Gearcase
Handle
Fuel
Tank
Throttle
Trigger
Gearcase
Cutting Attachment
Shield
Outer Tube
Ignition Switch
Ignition Switch
Fuel Tank
Spark Plug
Spark Plug
Barrier Bar
Figure 4
Trimmer Head
T272X Grass Trimmer
Trimmer
Head
* Shindaiwa One meets or exceeds these specifications and is recommended for all Shindaiwa Products
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine
has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended).
Engine Code S272E Engine
Dry weight, T272 (less attachment)
6.7kg/14.7 pounds
Dry weight, T272X (less attachment)
6.7kg/14.8 pounds
Engine Type 2-cycle, vertical cylinder, air cooled
Bore x Stroke 34 mm x 30 mm/1.3 in. x 1.2 in.
Displacement 27.2cc/1.7 cu. in.
Maximum Power Output 1.1 kw/1.4 hp
Operating rpm Range 4,500-9,000 rpm (min
-1
)
Transmission Type Automatic centrifugal clutch with bevel gears
Fuel/Oil Ratio 50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil*
Fuel Tank Capacity 670ml/22.6 ounces
Carburetion Walbro diaphragm-type
Ignition Fully electronic, transistor controlled
Spark Plug Champion CJ8Y
Air Cleaner Type Non-reversible heavy-duty filter element
Starting Method Recoil
Stopping Method Slide switch, grounding type
Handle T272 Loop handle T272X Loop handle with barrier bar
EPA Emission Compliance Period** Category A
Specications T272/T272X
Specifications are subject to change without notice.