Filter
Top Products
5. Remove the caution label, push the
thumb release toward the center
and push the control knob and
spring down until the knob latches.
See Figure 5.
Caution!
Once the knob is latched, do not
move the thumb release until you
have completed step 8!
6. Slide the wire retaining clip onto the
wire. Insert the control wire
through the hole in the shutoff
plate, then slide the clip over the
shutoff plate until the clip locks into
place. See Figure 6.
3
Assembly, continued
Figure 5
Figure 6
Control Knob &
Wire Assembly
Spring
Remove Caution
Label
Thumb
Release
Figure 7
O
F
F
O
N
Wire Clip
Shutoff Plate
Wire
Handle
Grips
Screen
Clips
Screen
7. Install handle grips onto the
handle. It is not necessary to use
lubricants to do so. Insert screen
into hopper by sliding it under the
screen clips. See Figure 7.
The 75RS spreader should now
be completely assembled and
ready for use.
O
FF
O
N
Parts
Replacement parts may be obtained
from your local Shindaiwa dealer.
When ordering, be sure to include the
spreader model number, part number
and description as shown here.
Hopper Assy. 15269-1 14 Agitator 14510
1 Hopper* 15270 15 Impeller Shaft Bearing* 14312-1
2 Shutoff Plate* 14454-1 16 Hopper Screen 14603
3 Shutoff Plate Guide (2)* 15272 17 Screen Clip (2) 14022
4 Rate Cam & Chute Assy.* 14455-1 18 Handle Brace w/Plug-L.H. 15258-1
5 Impeller Assy. 15263 19 Handle Brace w/Plug-R.H. 15261-1
6 Frame Assy. 15262-1 20 Handle Tube 15283-1
7 Drive Wheel w/tire 14939-1 21 Handle Grip (2) 15264
8 Axle Gear 13360 22 T-Handle Assy. 13634-2
9 Gear Cover Assy. 14629 23 Control Knob Spring 14462
10 Axle Collar 13362 24 Control Knob & Wire Assy. 13640-2
11 Axle 15276 25 Wire Retaining Clip 13643-1
12 Axle Bushing (2) 14951 26 Hopper Label* 15275
13 Free Wheel w/tire 14940-1 27 Hopper Plug 15271
Key Description Part Key Description Part
No. No. No. No.
Optional Accessory
Hopper Cover 14606
The clear plastic Hopper Cover fits
over the top, preventing moisture
from contaminating the chemicals.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
*Items included in the Hopper assy.
75RS
75RS
T
M