Servis-Rhino FS15 Brush Cutter User Manual


 
TORQUE LIMITER ASSEMBLY S/N 00101 - 10001 OCT 1977 - AUG 1987
ITEM PART NO. QTY. DESCRIPTION
70105 TORQUE LIMITER ASSY
1 701052 1 DRIVE PLATE
2 00748832 1 PLATE,PRESSURE
3 00748833 2 DISC,CLUTCH
4 701054R 1 HUB, TORQUE LIMITER
5 00748825 1 BUSHING
6 701055R 1 NUT ADJ TOPLOCK
7 00748831 4 SPRING, BELLEVILLE
8 701053R 1 PLUG BRONZE
9 9C16163 1 SHSS CUP POINT 3/8NC X 3/8 PL
10 00748834 1 BACK PLATE
Note: Item #7 is hex shaped nut. Check before ordering.
Notice: Most Parts are interchangeable with the Warner-Motive Torque Limiter (70105). To prevent damage to the
assembly, do not use or mix 0731070006 spring together with 701056 spring on the sam assemly. Also, replacement of
the disc and spring with Warner parts will lower the capacity of the
FS15 Master Parts Book (July-05)
©2005 Alamo Group Inc. Parts Section – 74