Servis-Rhino 4211SS Lawn Mower Accessory User Manual


 
OPERATION
4211-4211SS 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 72” material bucket operated with an average tractor hydraulic system of 16.5 GPM
with engine operating at 2300 RPM and control valve relief setting of 2900 PSI.
4211 4211SS
Horsepower Range 50-80 HP 50-80 HP
System pressure/flow rate 2900 PSI/ 16.5 GPM 2900 PSI/ 16.5 GPM
Lift Capacity to maximum height 2150 lbs. 2960 lbs.
Breakout force at pivot pin 6216 lbs. 5790 lbs.
Rollback force at ground line 3410 lbs. 3410 lbs.
Total weight with bucket (approx.) 1825 lbs. 1883 lbs.
Hydraulic system flow 16.5 GPM 16.5 GPM
System pressure at rated flow 2900 PSI 2900 PSI
(A) Maximum Lift Height at Pivot Pin 129” 131”
(B) Clearance with Bucket Dumped 94” 97”
(C) Reach at Maximum Height 35” 35”
(D) Maximum Dump Angle 55° 60°
(E) Reach with Attachment on Ground 83” 83”
(F) Attachment Rollback Angle 39° 40°
(G) Digging Depth 5” 4”
(H) Overall Height in Carry Position 66” 67”
(Manufacturers estimated specifications and design subject to change without notice.)