Filter
Top Products
ASSEMBLY
2409TL 01/11 Assembly Section 3-9
© 2011 Alamo Group Inc.
ASSEMBLY
Assembling Quick Attach Device
Quick attach device can be installed using tools
ordinarily available.
Torque all hardware to specifications listed in loader
operator’s manual.
Shut off the tractor engine and engage the tractor
brakes during installation.
Only quick attach, skid steer compatible
attachments can be used with the quick attach
device. Pin on style attachments can be used on
the loader, but necessitate removal of the quick
attach device and relocation of the bucket level
indicator.
All references to left and right used in these
instructions are as they would appear to the
operator standing at the rear of the unit facing
forward.
1. Quick attach device is pre-assembled at the factory.
2. Unband the quick attach device and wood blocks. (Figure Asm-L-0012)