Filter
Top Products
L-1643BH-D 4.
Step 1.
ATTACH END PANELS TO TRAY
2a) Install Drawbar (4) to
Tray (3) using two 5/16” x3/4”
Rd Hd. Screws (13), 5/16”
Lock Washers (16) and 5/16”
Hex Nuts (15), as shown.
2b) Attach Clevis (1) to
Drawbar using two 5/16” x 1”
Rd Hd. Screws(14), 5/16”
Lock Washers (16) and 5/16”
Hex Nuts (15), as shown.
2c) Attach Transport Lock
Pin (24) to End Panel (5)
using one 5/16” Lock Washer
(16) and 5/16” Hex Nut (15),
as shown.
NOTE
: The inside distance
between the two end panels
should be 41 inches to
ensure proper installation.
INSTALL DRAWBAR
Step 2.
1a) Attach the two End Panels (5)
to the Tray (3) using six 5/16” x3/4”
Rd Hd. Screws (13), 5/16” Flat
Washers (29), 5/16” Lock Washers
(16) and 5/16” Hex Nuts (15), as
shown.
16
5/16” Lock Washer
Qty. 6
13
5/16” x 3/4” Rd Hd Screw
Qty. 6
29
5/16” Flat Washer
Qty. 6
15
5/16” Hex Nut
Qty. 6
3
15
13
16
29
5
16
5/16” Lock Washer
Qty. 5
15
5/16” Hex Nut
Qty. 5
13
5/16” x 3/4” Rd Hd Screw
Qty. 2
14
5/16” x 1” Rd Hd Screw
Qty. 2
24
Transport Lock Pin
Qty. 1
4
3
13
15
15
15
5
16
16
16
14
24
1
ASSEMBLY