Sears CC-560 Cultivator User Manual


  Open as PDF
of 8
 
1007076 Rev. A
7
14
20
8
13
3
17
5a.AssembleoneoftheGaugeShoe
halves(7)toFrameAngle(4)using1/2"x
1-1/2"Bolts(10),1/2"Lockwashers(19),
and1/2"Nuts(15).Noteslotorientationin
illustration.
5b.AttachGaugeShoehalves(7)together
using3/8"x1"CarriageBolt(12),3/8"
Washer(20),3/8"Lockwasher(17),and
3/8"Nut(14).
6a.AttachCultivatortoyourTractorHitchinloweredposition.
6b.AdjustHitchBracketonCultivatortoobtaindesireddepthof
Cultivator.
6c.Cultivatorshouldbeparalleltoground.AdjustPlowBolts(13)to
levelCultivatorShanks.PullBar(3)maybeinvertedtoincreasedepth
ofcultivation.
6d.AdjustGaugeShoes(7)tomaintaindepth.Tighten all bolts
securely.
IMPORTANT
Cultivator must be stabilized to eliminate
"side to side" movement when cultivating crops. This is an
adjustment on the Sleeve Hitch, refer to Sleeve Hitch Manual for
instructions.
6e.Ifadditionalweightisneeded(seepage3)concreteblockshould
beattachedtothecenterofthePullBar(3)withtheRodTieDown(8),
3/8"PlainWasher(20),3/8"Lockwasher(17),and3/8"Nut(14).
Figure 5
Figure 6
GAUGE SHOE ASSEMBLY
MOUNTING ADJUSTMENT
ASSEMBLY
17
14
20
12
15
19
7
10
4
(10)
Bolt,1/2"x1-1/2"
Qty.2
(12)
CarriageBolt,3/8"x1"
Qty.2
(19)
Lockwasher,1/2"
Qty.2
(17)
FlatWasher,3/8"
Qty.2
(20)
Lockwasher,3/8"
Qty.2
(15)
Nut,1/2"
Qty.2
(14)
Nut,3/8"
Qty.2
 previous