Filter
Top Products
ASSEMBLY
i rill iiiii ,,ll,ll lllll i
TO ASSEMBLE AND ATTACH GRASS
CATCHER (See Figs, 3A thru 4)
• insert leg of tubular frame through trent Opening of
glass catcher and thread frame Into sewn hem of bag..
NOTE:. Keep bag hem gathered on he straight leg of the
tubular frame.
• When frame comes out the other end of sewn hem,
immediately work the end of frame down Instdethe bag
as Shown in InseL
• Stile sewn hem evenly around the tubular frame until
both ends of frame are exposed out of the front open-
tng,,
• Assemble Iower frame to tubular frame as shown. Be
sure handle is outside of bag and frames are fully
seated as shown in Inset.
• Slip viny_ bindings over frame.
NOTE: tf vinyl bindings are too st}if, hold them inwarm
water for a few minutes, ifbag gets wet, let It dry before "-_.
using,,
• Closet_efllpiid FlipIidmustbeclosedwhfteoperating
lawn mower
• Lift the rear door onthe mower housing and place the
grass catcher lrame onto the formed tabs oh the rear
door hinge bracket,
• The grass catcher is secured to the lawn mower
housing when the rear door {slowered onto the grass
catcher Irame.
cAuTION: Donot runyourlawn mower
without clipping deflector or approved
grass catcher in placer Neverattempt
tooperate thelawn mowerwith therear
door removed or propped open.
SEWN HE_ FLIP LID
LowER
(Frams_must
TUBULAR ! '
FiG, 3B
LOWERFRAMEHANDLE
. : FIG. 3C
BRACKET
GRASS
CATCHER
FRAME
FORMED
TABS
FIG. 4
FIG. 3A
7