Filter
Top Products
CUSTOMER ;IBILITIES
MAINTENANCE SCHEDULE
FILL iN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Pressure
T
Check for Loose Fasteners
AR Sharpen!Replace Mower Blades
C Lubrication Chart
T Check Battery Level/Recharge
0 Clean Battery and Terminals
a Check Transaxle Cooling
Adjust Blade Belt(s) Tension
Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level
Change Engine Oil
CIean Air Filter
E
N clean Air Screen
G inspect Muffler/Spark Arrester
I Replace Oil Filter (It equipped)
_ CleanEngine Cooling Fins--
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter !
v'
v'
i/
!/
i
i/
i/
i/
i/
i/
i/ i/
, Iv'l
1 -Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating indirty or dusty conditions.
3 - If equipped with oil filter, change oil every 50 hours.
4 - Replace blades more often when mowing insandy soil.
_ERVICE DATES
5 - If equipped with adjustable system.
6 - Not required if equipped with maintenance-lree battery.
7 - Tighten front axle pivot bolt to 35 ft,qbs, maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have
been subjected to operator abuse or negligence. To
receive full value from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
LUBRICATION CHART
(_) "FRONT WHEEL (_)
BEARING ZERK BEARING ZERK
Once a year you should replace the spark plug, dean
or replace air filter, and check blades and belts for
wear. A new spark plug and clean air filter assure
proper air-fuel mixture and help your engine run better
and last longer.
©
CLUTCH
PIVOT(S)
ENGINE (_
BEFORE EACH USE
o Check engine oil level.
* Check brake operation.
- Check tire pressure.
- Check for loose fasteners.
®
PIVOTS
(_) SAE 30 OR 10W30 MOTOR OIL
(_) GENERAL PURPOSE GREASE
G) REFER TO CUSTOMER RESPONSIBILtT_ES
"ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI-
CANTS WiLL ATTRACT DUST AND DiRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS. IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
15 DERED GRAPHITE TYPE LUBRICANT SPARINGLY.