Filter
Top Products
E CE AND ADJUSTMENTS
TO ADJUST ATTACHMENT LiFT SPIRING
(See Fig. 36)
• While holding spring bushing with wrench, loosen jam
nut.
• Turn adjustment bolt clockwise to extend spring and
reduce lift effort (for heavier attachments).
,, Turn adjustment bolt counterclockwise for lighter at-
tachments.
Retighten jam nut against spring bushing.
IMPORTANT: DO NOT ADJUST FOR MAXIMUM SPRING
TENSION WHEN USING LIGHT ATTACHMENTS SUCH
AS A MOWER. ADJUST LIFT LEVER SPRING TO AID IN
LIFTING ATTACHMENT. DO NOT OVERPOWER SPRING.
WHEN REMOVING ATTACHMENT, ALWAYS ADJUST
SPRING TENSION TO ITS LOWEST POSITION.
ADJUSTMENT SPRING BUSHING
BOLT
® ATTACHMENT
JAM NUT UFT SPRMNG
o ®
FiG. 36
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 37)
• Raise hood.
,, Unsnap headlight wire connector.
• Stand in front of tractor. Grasp hood at sides, tilt toward
engine and lift off of tractor°
o To replace, reverse above procedure.
HOOD
/
/
,/
WIRE
CONNECTION
/
FNG.37
24