Filter
Top Products
SERVICE ADJUSTMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift lever in neutral (N) position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key,
• Make sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
TO REMOVE MOWER (See Fig. 16)
Place attachment clutch n "DISENGAGED" position.
Turn _--,7ht adiustment knc' *- '-w_ _'_setting.
Lower mower to _tsIowesl oos_non
Disconnect clutch rod from clutch ever by removiBg
retainer spnng.
Remove retainer spring holdtng anu-swaycar [o cnas-
sis bracket and disengage antl-swaybar from bracket.
Remove retainer springs from suspension arms at
OeCKana disengage arms frorr deck.
Raise attachment lift to its hignest positior
Remove two retainer spnngs from each front link and
remove links,
Slide mower forward and remove belt from engine
9ulley.
Slide mo_ er out from unoer r_ghtside of tractor.
IMPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER DECK S TO BE MOUNTED ON THE TRACTOR
REMOVE THE FRONT LINKS.
TO INSTALL MOWER
Fellow procedure described n "INSTALL MOWER AND
DRIVE BELT" in the Assembly section of this manual.
ADJUSTMENT CLUTCH
NUTS
SUSPENSIO_
ARMS
RETAINER
SPRING
FRONT
IGINE
PULLEY
/
RETAINER
SPRING
/
ANTI-SWAY
BAR
RETAINER
SPRINGS
"_"_'_'_ FRONT
SUSPENSION
LINKS _X BRACKET
\
RETAINER
FRONT MOWER
, BRACKET
FIG. 16
2O