Sears 45-02181 Lawn Sweeper User Manual


 
7
BRUSH REPLACEMENT
1. Remove the hopper bag from lawnsweeper.
2. Brush replacement should be done one brush at a
time.
3. Tip the sweeper forward on housing for ease of brush
replacement. Do not remove hex bolt from double
brush retainers through brush shaft.
4. Loosen hex bolts and hex lock nuts from single brush
retainers.Seegure13.Slidebrushoutofretainers,
making not of over-lap bristles position.
5. Install new brush, making sure over-lap bristles are
postionedthesameasbeforeandasshowningure
13.
FIGURE 13