Filter
Top Products
31
R
Section 7
MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS7.1
HOURS
PROCEDURE COMMENTS
BREAK-IN
(FIRST 10)
8 40 100 200 500
X
Check all hardware for tightness
X
Check hydraulic oil level See paragraph 7.3
X
C he ck al l be lt s fo r pr op er
alignment
See paragraph 7.8
X
Change engine oil and filter See paragraph 7.4
X
Check coolant level See paragraph 7.11
X
Check hydraulic hoses for leaks Use extreme caution when
checking the hydraulic hoses.
See paragraph 2.6
X
Check engine oil level See paragraph 7.4
X
*Clean mower See paragraph 7.12
X
Check condition of blades See paragraph 7.9
X
Apply grease to fittings See paragraph 7.2
X
Check tire pressure See paragraph 7.10
X
Inspect seat belt for wear or
damage
See paragraph 2.5
X
Check the operator interlock
system
See paragraph 4.2
X
Check coolant level See paragraph 7.11
X
Check battery electrolyte level
clean battery posts and cables
See paragraph 7.7
X
Check belts for proper alignment See paragraph 7.8
X
Apply grease to fittings See paragraph 7.2
X
Change engine oil See paragraph 7.4
X
*Clean air cleaner element See paragraph 7.6
X
Check lubricant in cutter deck
gearbox
See paragraph 7.11
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions
MAINTENANCE