Scag Power Equipment SMTC-48V Lawn Mower User Manual


 
19
Section 8
1 482643 Pump, BDP-10A-316 (LH)
482644 Pump, BDP-10A-419 (RH)
2 482266-01 Elbow, 90 Degree 9/16 O-Ring x 3/8 Hose
3 48572-02 Fitting, 1/2” JIC x 5/8 O-Ring
4 48811 Hose, 3/8 Pushlock (Specify length)
5 482573 Bushing
6 482574 Fitting
7 482266-01 Elbow, 90 Degree 9/16 O-Ring x 3/8 Hose
8 48136-13 Hose Clamp, .69 Dia.
9 482548 Hose Assembly
10 04060-06 Roll Pin
11 48572-04 Fitting, 1/2” JIC x 1/2” O-Ring
12 48603-06 O-Ring
13 04001-20 Bolt, Hex Head 3/8-16 x 1-1/2”
14 04017-07 Bolt, Hex Head 1/4-20 x 1-1/4”
15 04030-02 Lockwasher
16 04021-09 Nut, Elastic Stop 3/8-16
17 422969 Control Lever
18 04001-08 Bolt, Hex Head 5/16-18 x 3/4”
19 04030-03 Lockwasher, 5/16”
20 04040-15 Flatwasher, 5/16-.375 x .875 x .083
21 481164 Cap, Hydraulic Tank
22 481507 Insert, Filler Neck
23 48829 Control Block
24 421203 Clamp Plate
25 461479 Hydraulic Tank Assembly w/fittings
26 48603-06 O-Ring, 9/16”
27 482277 Tee Fitting, O-Ring to Barb
28 48136-13 Clamp, .69 Max. / .25 Min. Dia.
29 482571 Bushing
Ref. Part
No. No. Description
Ref. Part
No. No. Description
FUEL AND HYDRAULIC SYSTEM
30 482572 Elbow, 0.38 Hose
31 48136-13 Clamp
32 483617 Fuel Hose, 1/4 ID (order by the inch)
33 423912 Bracket Fuel Valve
34 48059-01 Clamp, Fuel Hose 1/4 Hose ID
35 482212 Valve, Fuel Shutoff
36 48136-13 Clamp, .69 Max. / .25 Min. Dia.
37 482800-02 Fitting, 9/16 O-Ring x 3/8” Hose
38 04019-03 Nut, Serr. Flange 5/16-18
39 04041-07 Flatwasher, 3/8-.391 x .938 x .105
40 48462-01 Oil Filter
41 482798 Filter Head Assembly
42 482800-01 Fitting, 3/4 O-Ring x 3/8 Hose
43 48604-03 Plug, 9/16-18 O-Ring
44 482557 Hose, Filter Inlet
45 461969 Fuel Tank RH
46 482547 Cap, Fuel Tank (incl. item #53)
47 48309 Tank Bushing
48 48939 Elbow, 90 Degree
49 461476 Fuel Tank LH
50 48811 Hose, 3/8 Pushlock 15” Long
51 04001-17 Bolt, Hex Head 5/16-18 x 2”
52 04010-10 Screw, 1/4-20 x 2”
53 482774 Gasket, Gas Tank Cap
54 ** Fuel Filter
55 482605 Hose Assembly
56 04001-11 Bolt, Hec Head 5/16-18 x 1-1/2”
57 482802 Nipple, Oil Filter 1.0-12 UNF-2A x 1-1/4”
58 48603-02 O-Ring, 3/4”
** Available through the individual engine manufacturer.