Filter
Top Products
GB
1
SEE FIG.
STRAIGHT SHAFT TRIMMER SS-18
P
art Number Model Used On Quantity Description
10000 BC-8/SS-18/CS-16 1 Decal for pipe
10001 SS-18 1 Pipe assembly
10002 SS-18/CS-16 1 Label
10003
SS-18 1 Pipe assembly without flex shaft
10005 SS-18 1 Owner’s manual
10007 SS-18 1 Bolt for gear case clamp
10009 SS-18 1 Plastic gear case hood
10010 BC-8/SS-18 1 Regular flexible shaft with stopper
10011 SS-18 1 Gear case 3 bearing without holder and cover
10012 SS-18 1 Holder A
10013 SS-18 1 Guard assembly
10014 CS-16/SS-18/BC-8 1 Nose cone A
10015 CS-16/SS-18/BC-8 1 Nose cone B
10016 CS-16/SS-18/BC-8 2 Nose cone screws
10017 CS-16/SS-18/BC-8 1 Engine clamp assembly
10018 SS-18 1 Protector without blade
10021 SS-18 1 Blade to cut nylon code
10022 SS-18 2 Bolts for blade
10023 SS-18 2 Nuts for blade
10025 SS-18 1 Clamp for guard
10026 SS-18 2 Bolts for clamp
10031 SS-18 1 Tap and go with diameter 0.095"
10032 SS-18/CS-16 1 Single type lever
10033 SS-18/CS-16 1 On/Off switch
10041 SS-18/CS-16 1 Cable, throttle
10042 SS-18 1 Handle assembly
10043 SS-18 1 Handle
10052 BC-8/SS-18 1 Hanger assembly
10053 BC-8/SS-18 1 Harness assembly
10069 SS-18 2 Bolts
10235 SS-18/CS-16 3 Screws for loop handle
10236 SS-18/CS-16 3 Nuts for loop handle
Engine SS-18/CS-16 1 Engine 34cc 4-cycle Briggs & Stratton, Model 21032 0118 E1
1
ILLUSTRATED PARTS LIST
WARNING: IT IS UNSAFE TO USE ANY AFTER MARKET HEAD,
ATTACHMENT, ACCESSORY OR BLADE ON THIS UNIT.USE
ONL
Y HEADS
, ATTACHMENTS, BLADES AND ACCESSORIES
MANUFACTURED BY SARLO AND INTENDED FOR THIS
SPECIFIC MODEL.