Filter
Top Products
Troubleshooting - 48
TROUBLESHOOTING
Belt Slipping Debris in sheaves.
Worn belt.
Too Much Vibration Debris on mower deck or in sheaves.
Damaged sheaves or sheaves out of alignment.
Damaged drive belt.
Blades out of balance.
Blades Scalping Grass Cutting too low.
Mower wheels not adjusted correctly.
Turning speed too fast.
Ridges in terrain.
Rough or uneven terrain.
Low tire pressure.
Mower Loads Down Tractor Engine rpm too low.
Travel speed too fast.
Debris wrapped around mower spindles.
Uneven Cut Mower deck not leveled properly.
Travel speed too fast.
Blades dull.
Mower wheels not adjusted correctly.
Tire pressure unequal.
Grass Tips Are Jagged And Turn Grayish Brown
After Mowing
Dull mower blades.
Mower deck not leveled properly.
Mower (Or Other Attachment) Stops When
Reverse Foot Pedal Is Depressed And Attachment
Is Engaged
Normal condition. (See Using Reverse Implement Option in the
OPERATING Section.)
IF CHECK