Filter
Top Products
8 9
UNPACKING
This product requires assembly.
n Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
n Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-860-4050 for assistance.
FEATURES
KNOW YOUR PRUNER/TRIMMER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ENGINE SWITCH
The engine switch controls the ignition system. The switch
must be in the ON (I) position for the engine to start and
run.
“J” BARRIER HANDLE
Using the J” Barrier handle allows better control of the pruner
to maximize operator safety.
PRIMER BULB
The priming bulb pumps fuel from the fuel tank to the car-
buretor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.
SHOULDER STRAP
The shoulder strap helps support the weight of the pruner
during use.
START LEVER
The start lever opens and closes the choke valve in the
carburetor.
STARTER GRIP
The starter grip is used for starting the engine.
THROTTLE TRIGGER
The throttle trigger is used for starting the pruner, and also
for controlling blade rotation.
ASSEMBLY
PACKING LIST
Power Head Assembly
Pruner Attachment
Trimmer Attachment
Hex Screw
Flat Washer
Wing Nut
Lock Washer
Curved Shaft Grass Deflector
Scabbard
Scrench (5/8 in. x 3/4 in.)
8 oz. Bar and Chain Oil
Bottle of 2-cycle oil
Shoulder Strap Bracket
Bolt
Nut
Shoulder Strap
“J” Barrier Handle Assembly:
“J” Barrier Handle
Top and Bottom Clamp
Short Bolt
Long Bolt
Flat Washers (2)
Lock Washers (2)
Nuts (2)
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the
missing parts are replaced. Failure to heed this warning
could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.