Filter
Top Products
5
SYMBOLS
Keep Bystanders Away
Cutting Hazard
Eye Protection
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Keep all bystanders at least 50 ft. away.
Keep feet and hands away from rotating tines.
50
'
15
m
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
Read The Operator’s Manual
Safety Alert
SYMBOL NAME DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
Always wear safety goggles or safety glasses with side shields
and, as necessary, a full face shield when operating this product.
Precautions that involve your safety.
Wet Conditions Alert
.../min
Per Minute
Class II Construction
n
o
No Load Speed
Direct Current
Alternating Current
min Minutes
W Watt
Hz Hertz
A Amperes
V Volts
Hot Surface
To reduce the risk of injury or damage, avoid contact with any
hot surface.